Closed Loop Cooling Towers
From Whaley Products, Incorporated
Welcome to ClosedLoopCoolingTowers.org from Whaley Products, Inc. Does your company have a water loop it needs cooled but kept clean? WPI's closed loop cooling tower systems are cost efficient, energy efficient, and most of all, long-lasting. The WPCL-Series, CLIO-Series, and CLS-Series Closed Loop Cooling Tower Systems incorporate Whaley Products, Inc's proven fiberglass reinforced polyester (FRP) cooling towers. Don't waste your maintenance man's time with conventional rust prone galvanized cooling towers that will inevitably rust from the inside out due to the ever-strengthening Ultraviolet radiation from today's sun.
Three Closed-Loop Tower Configurations:
|
WPCL-Series
|
CLIO-Series |
CLS-Series |
Full System on 1 Skid
Outdoor or Indoor
(10ton - 125ton)
|
Outdoor: FRP Cooling Tower
Indoor: Pump Tank, Strainer, Heat Exchanger skid
|
Outdoor: Cooling Tower,
Pump Tank, Heat Exchanger skid
(Up to 1000ton)
|
|
|
|
Whaley Towers have a life expectancy of 20+ years.
How does WPI accomplish this? Very simple.
WP Series Cooling Tower Features
Construction material details:
 Non-corrosive FRP(Fiberglass Reinforced Polyester) marine grade resins
Surface layer containing pigmented gel coat
Ultraviolet (UV) inhibitor included as an additive to the composite matrix.
Accu-Pac cross fluted fill pack:
 
Improves water distribution by splitting water stream 8 times in a 12” vertical path as it descends through the fill pack
Constructed entirely of CTI (Cooling Tower Institute) Standard 136 PVC
Accu-Pac counterflow cellular drift eliminators
High surface area provides maximum performance at minimum pressure drop
Constructed entirely of CTI (Cooling Tower Institute) Standard 136 PVC
Cellular Inlet Louvers installed:
Improve air flow into cooling tower
Prevent debris from entering
Eliminate water splash-out that can cause icing, water treatment chemical loss
Restricts amount of sunlight into cooling tower impeding algae growth
Reduce noise from tower
Improve tower's appearance
Constructed entirely of CTI (Cooling Tower Institute) Standard 136 PVC
Lightweight ABS plastic non-clogging Dek-Spray nozzles
serviceable at temperatures up to 180F/82C
Results in less system weight & piping cost
Steel Tower platform with fork slots
4" C-Channel
Sheered sheet metal cover with cut-out for bottom tower drain
Painted with gray Macropoxy 646 Fast Cure Epoxy (high solids, high build, polyamide epoxy designed to protect steel and concrete in industrial exposures)
Side or bottom outlet drain
Location and size of outlet fitting determined according to your requirements
Other Features
Schedule 80 distribution header
|
PVC inlet flange
|
½" automatic water makeup
|
Stainless steel hardware
|
Glossy white color
|
Direct drive fan motors
|
Axial fan blades
|
|
 |
