150 GPM Closed Loop Cooling Tower

Accu-Pak cross fluted fill pack:

Improves water distribution by splitting water stream 8 times in a 12” vertical path as it descends through the fill pack

Accu-Pac counterflow cellular drift eliminators:

High surface area provides maximum performance at minimum pressure drop
Constructed entirely of CTI (Cooling Tower Institute) Standard 136 PVC
0.001 % drift emissions per CTI STD-140 Test Method

Cellular Inlet Louvers installed:

Improve air flow into cooling tower
Prevent debris from entering
Eliminate water splash-out that can cause icing, water treatment chemical loss
Restricts amount of sunlight into cooling tower impeding algae growth
Reduce noise from tower
Improve tower’s appearance
Constructed entirely of CTI (Cooling Tower Institute) Standard 136 PVC

Lightweight ABS plastic non-clogging Dek-Spray nozzles

Serviceable at temperatures up to 180F/82C
Results in less system weight & piping cost

Steel Tower platform:

4” C-Channel
Painted with gray Macropoxy 646 Fast Cure Epoxy (high solids, high build, polyamide epoxy designed to protect steel and concrete in industrial exposures)

Stainless Steel Plate Heat Exchanger:

Tower Recirculation Pump:

5.0 HP #17 Tower Pump, 60’ Head at 150GPM, (2”x2”NPT)

Stainless Steel Flushable Filtration Strainer:

3″ NPT inlet/outlet, Max Flow: 200GPM
304SS Standard, 316SS available as option

NEMA 4 Pump/Fan Control Panel:

Starters, temp control switch installed in cold line
Fusible disconnect
Fan motor Variable Frequency Drive available as option

Direct Drive Fan Motors & Axial Fan Blades:

½ automatic water makeup

Stainless steel hardware

Glossy White Color