WPCL-Series Single-Skid

Closed Loop Cooling Towers

WPI’s WPCL-Series closed loop cooling towers incorporate WPI’s proven WP-Series FRP cooling towers with stainless steel heat exchangers, stainless steel strainers, and circulation pumps all assembled on a common skid. Whaley Products has been packaging these systems for a variety of industrial needs for many years. Whether you’re company is needing the clean water loop for HVAC, industrial, oil & gas, machining, milling, chemical, dry-cleaning, or any other application, the WPCL-Series closed circuit cooling tower will provide you with a long lasting, cost efficient, energy efficient cooling solution. Other configurations include the CLIO-Series indoor/outdoorsetup that incorporates an outdoor cooling tower and an indoor heat transfer/pump-tank skid. For increased capacity, check out the multi-cell CLS-Series closed circuit cooling towers.

WP1850sideviewWP1850sidejpg

WPCL-Series Capacities Available:

(Click links on table to view more details)

Model
Tower Tons / KW
Flow: GPM
HX Type
Pump
Strainer In/Out
Strainer Max Flow
PDF literature
WPCL650-10
10 Ton/44KW
30 GPM
PHX
1.0 HP, #11
2″ NPT Bottom
100 gpm
WPCL650-15
15 Ton/66KW
45 GPM
PHX
1.5 HP , #126
2″ NPT Bottom
100 gpm
WPCL850-20
20 Ton/88KW
60 GPM
PHX
2.0 HP, # 16
2″ NPT Bottom
100 gpm
WPCL850-25
25 Ton/110KW
75 GPM
PHX
2.0 HP, #16
2″ NPT Bottom
100 gpm
WPCL1250-30
30 Ton/132KW
90 GPM
PHX
3.0 HP, #17
2″ NPT Bottom
100 gpm
WPCL1250-40
40 Ton/176KW
120 GPM
PHX
3.0 HP, #17
3″ NPT Bottom
200 gpm
WPCL1550-50
50 Ton/220KW
150 GPM
PFHX
5.0 HP, #17
3″ NPT Bottom
200 gpm
WPCL1550-75
75 Ton/330KW
225 GPM
PFHX
7.5 HP, #15
4″ flange side
350 gpm
WPCL1850-100
100 Ton/440KW
300 GPM
PFHX
10 HP, #15
4″ flange side
350 gpm
WPCL1850-125
125
Ton/550KW
375 GPM
PFHX
10 HP, #56F
4″ flange side
350 gpm

For higher capacity, see our CLS-Series Closed Circuit Cooling Towers
UNIT CAPACITY RATING:
3 GPM / ton from 95°F to 85°F (at 78°F wet bulb).

Whaley Towers have a life expectancy of 20+ years.
How does WPI accomplish this? Very simple.

WP Series Cooling Tower Features

Construction material details:
frpmaterial
Non-corrosive FRP(Fiberglass Reinforced Polyester) marine grade resins
Surface layer containing pigmented gel coat
Ultraviolet (UV) inhibitor included as an additive to the composite matrix.

Accu-Pac cross fluted fill pack:
ctilogosmallfillmaterial
Improves water distribution by splitting water stream 8 times in a 12” vertical path as it descends through the fill pack
Constructed entirely of CTI (Cooling Tower Institute) Standard 136 PVC

Accu-Pac counterflow cellular drift eliminators
ctilogosmalldriftmaterial
High surface area provides maximum performance at minimum pressure drop
Constructed entirely of CTI (Cooling Tower Institute) Standard 136 PVC

Cellular Inlet Louvers installed:
ctilogosmalllouver (1)
Improve air flow into cooling tower
Prevent debris from entering
Eliminate water splash-out that can cause icing, water treatment chemical loss
Restricts amount of sunlight into cooling tower impeding algae growth
Reduce noise from tower
Improve tower’s appearance
Constructed entirely of CTI (Cooling Tower Institute) Standard 136 PVC

Lightweight ABS plastic non-clogging Dek-Spray nozzles
nozzles (1)
serviceable at temperatures up to 180F/82C
Results in less system weight & piping cost

Steel Tower platform with fork slots
towerframe
4″ C-Channel
Sheered sheet metal cover with cut-out for bottom tower drain
Painted with gray Macropoxy 646 Fast Cure Epoxy (high solids, high build, polyamide epoxy designed to protect steel and concrete in industrial exposures)

Side or bottom outlet drain
towerdrains
Location and size of outlet fitting determined according to your requirements

Other Features

Schedule 80 distribution header
manifolds
PVC inlet flange
manifold2

½” automatic water makeup
makeupvalve
Stainless steel hardware
hardware
Glossy white color
whitegloss
Direct drive fan motors
towerfanmotorsmall
Axial fan blades
axialbladessmall